CHGeek Wireless Car Charger, 15W Fast Charging Auto Clamping Car Charger Phone Mount Phone Holder fit for iPhone 15 14 13 12 11 Pro Max Xs, Samsung Galaxy S23 Ultra S22 S21 S20, S10+ S9+ Note 9, etc

Rating: ⭐⭐⭐⭐⭐

I recently purchased the wireless charging phone mount and I must say, it has exceeded my expectations. This device is not only great, but it works flawlessly. The charging process is super smooth, and it charges my phone just as fast as a typical wall charger would.

One of the standout features of this phone mount is its convenience. All I have to do is place my phone in the dock, and it automatically closes and starts charging. Even with a phone case on, it still charges efficiently, which is a huge plus. The added button on the side of the mount is a clever addition, as it allows for easy and automatic release of the phone.

I must admit, this wireless charging phone mount is super cool. It has made my life so much easier, and I am extremely satisfied with my purchase. The build quality is excellent, and the design is sleek and modern. It’s a great addition to my car, providing a secure and efficient way to charge my phone while on the go.

If you’re in need of a reliable and convenient wireless charging solution for your phone, I highly recommend this product. It delivers on its promises and offers a hassle-free experience. Overall, I am extremely pleased with this purchase and would definitely buy it again.

Wow! This is the best wireless charger I’ve purchased to date. As of installation time it does everything it said it would.

I have purchased 5 different wireless chargers for my car. The first one worked for a couple years, then just died. The second one never worked as a wireless charger, which was ridiculous, so I gave it away to a family member that only wanted a mount and didn’t care about the wireless features. The next one sometimes worked and sometimes didn’t but it never stayed stuck to the windshield and dropped my phone constantly making it a hazard to driving (my dash is dimpled and sloped so that’s never been a location I can mount and I don’t believe in blocking my air flow with those mounts), so that one ended up in the Freecycle on FB. The most recent one that this one is replacing never worked as a wireless, no matter what I did, even taking the case off it just never worked (like the second one), but tired of trying to find the right one, I had given up and just used it, until it self-released my phone and broke the case! Ugh, another one that didn’t charge wirelessly and then malfunctioned, the clamping arm just randomly broke and there was no fixing it. So, now I not only had to find a new mount, but also buy a replacement phone case (at lease the case did it’s job and protected the phone).

One super fantastic feature is the securing to the windshield. First, it has the normal suction, but the clamping system is so much stronger than the others I’ve had, it really locks it down.

The adjustability of this is outstanding! All prior mounts had one adjustment, just the swivel and that’s it, this one has enough different adjustments that I can actually use it the way I had wished I could for years!

I love that this mount self-locks down on the phone, that’s awesome, not something I would have thought of, but how cool, and it does a nice job too.

The wireless feature works instantly and does a great job!

I cannot review the quick charge yet, as I still have my original adapter, but plan to get the QC3.0 soon and will rate on that when I do.

Overall this is a well designed and quality product and feels much more heavy-duty that prior products I’ve had. If this stands the test of time, I would definitely purchase again.

Using this mount with an Android phone: Samsung Galaxy S22, so I can’t really say how well it does with an iPhone.

Edit: Wireless charges my Google Pixel 6 Pro intermittently because of the coil location. I just added 2 adhesive felt strips on the bottom arm to lift the phone up, and boom, perfect. It ended up solving the high pitched squeeling noise too.

Pros:

The best part is the clamp system. It automatically closes the clamps when it senses the phone has been placed on it. The motors activate for 2 seconds, then keep the phone in place tightly. When you want to take it off, the electronic button on either side automatically releases the clamp. Easy easy easy.

The suction cup is a little sticky, and strong. Works super good on flat surfaces. Curved surfaces start to diminish its abilities. The top and bottom of my dash was too curved for this, so I put it on the back of my center display (2023 Tesla Model Y).

Doesn’t vibrate, very sturdy.

Cons:

The cable is a tad short, but I mounted mine closer to the center console on the dash, so it was fine for me. Maybe not fine if you mounted on the far side and the closest USB is further away (glovebox or near arm rest), especially if you want to hide the cable under the trim.

I do wish there was a way to tighten the ball joint mount, cause I can still move it. I would feel better if I didn’t have to adjust it if I bumped it accidentally. Though, it does stay in place, even during bumps.

(Solved. See edit at the beginning) I do sometimes hear a high-pitched noise after clamping the phone and the motors have stopped. Some older people probably won’t hear it. Goes away after 5 seconds. Not the same noise as the motors clamping into place. I hear the motors activate for 2 seconds, then 1 second of silence, then this high-pitched noise.

I am a delivery driver and I need to have my phone in front of me for delivery routing, and also to charge the unit as I am working, as my screen is on all the time. This product works well for that. I had one from a different seller that failed after only three weeks. This has lasted six months, which I consider good considering the holder is in constant use. When I make a delivery the phone goes with me to the door. When I pick up a deliver the phone comes along also, so the opening and closing mechanism gets a lot of use.

I do like that when I start my car, or just place the phone in the holder, the unit clamps automatically. My previous holder didn’t do this.

We get extreme heat here in Arizona. Air temperatures in summer reach 46 degrees. In a car that can be higher. I have learned to keep a light microfiber cloth draped over the holder and phone. The shading effect is enough that the phone does not overheat, and it works normally. And since the charging back and phone are directly in front of the cooling vents, this helps keep it cool.

Was very upset when my other auto sensor phone holder/charger broke. It’s hard to find a mount that will hold heavy phones like the Samsung Note 20 or the iPhone 15 ProMax. I never liked dash mounted phone holders. I was able to mount this so it duplicated the exact position of my older vent phone holder. The only suggestion I could make is that they make the base swivel so you can put the unit in the center of the dashboard and turn it to the left or right. I had to offset the holder facing me as the driver. From there I was able to adjust up and down/in and out. Having it mounted in the center of my dash and being able to turn it and tighten it into place would have been perfect. Would I buy again? Yes

NOTE: Earlier this week we had two very cold consistent days. When I got in the car on Monday the unit would not open and close. I checked all the connections and it had power. Had to drive to work with it sitting on the mount but not secure. It warmed up later in the day and on the way home the unit worked with no issues and I have not had any since. If you live in a very cold climate you might want to take this into consideration.