Coonyard (2-Pack) CR14250SE-FT 3-Pin PLC Lithium Battery 3V 850mAh 1/2 AA, Replacment for FDK/Sanyo CR14250SE, 1755-BAT, CR1/2AA, 1/2AA, CR14250, CR14250SET, 1/2R6, 1/2UM3, 1/2ER6

CR14250SE-FT 3 Volt 850 mAh PLC Lithium Battery with 3-Pin (2-pin [+] 8mm), 1/2AA-Size. CR14250SE-FT is a comon Industrial memory battery. CMOS Memory Battery typically used in computer mother boards, different mounting pin options available. This battery is to be soldered to PB board or connector pin. Specifications: Voltage:3 Volts Size: 1/2 AA Capacity: 850 mAh Chemistry: Lithium-Manganese Dioxide (Li-MnO2) Terminals: 3 Pins (2 Pin Positive; 8 mm spacing, 1 Pin Negative) Dimensions: Diameter 0.48″(14.5mm) x Height 0.99″(25.0mm) Weight: 0.02 oz (9.0 g) Stable voltage and broad temperature range: (-40° to +80°C) ANSI: 1/2AA, 1/2R6, 1/2UM3, IEC: 1/2ER6 Main Applications: Water & Electricity meters Fire Alarm Memory backup power Others Replaces the Following: 1755-BAT CR1/2AA, 1/2AA CR14250, CR14250SE, CR14250SET 1/2R6 1/2UM3 1/2ER6 Warning: This battery is not rechargeable. Do not try to recharge. The storage area should be clean, cool (not exceeding +30 Deg C ), dry and ventilated Don’t use different models of battery in series. Soldering the tab should be finished in few seconds. Do not use if the battery casing was mangled